unisonic technologies co.,ltd MGBR10L45 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r601-113.b mos gated barrier rectifier ? description the utc MGBR10L45 is a surface mount mos gatedbarrier rectifier,it uses utc?s advanced technology to provide customers withlow forward voltage drop and high switching speed, etc. ? features * low forward voltage drop * high switching speed ? symbol to-220-2 to-252/to-277 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 MGBR10L45l-ta2-t MGBR10L45g-ta2-t to-220-2 k a - tube MGBR10L45l-tn3-t MGBR10L45g-tn3-t to-252 a k a tube MGBR10L45l-tn3-r MGBR10L45g-tn3-r to-252 a k a tape reel MGBR10L45l-t27-r MGBR10L45g-t27-r to-277 a k a tape reel note: pin assignment: a: anode k: common cathode
MGBR10L45 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-113.b ? absolute maximum ratings (t a =25oc, unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load,derate current by 20%. parameter symbol ratings unit dc blocking voltage v rm 45 v workingpeak reverse voltage v rwm 45 v peak repetitive reverse voltage v rrm 45 v rms reverse voltage v r ( rms ) 32 v average rectified output current t c =140c i o 10 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 90 a repetitive peak avalanche power (1 s, 25c) p arm 5000 w operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c note: absolute maximum ratings are thoseval ues beyond which thedevice could be permanently damaged.absolutemaximum ratingsare stress ratings only and functional device operation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient to-220-2 ja 60 c/w to-252 110 to-277 73 (note 3) junction to case to-220-2 jc 2 c/w to-252 2.5 to-277 13 (note 3) ? electrical characteristics (t a =25c, unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v ( br ) r i r =0.5ma 45 v forward voltage drop v fm i f =10a, t j =25c 0.58 v i f =10a, t j =125c 0.53 v leakage current (note 1) i rm v r =45v, t j =25c 50 300 a v r =45v, t j =125c 12 40 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink. 3. mounted on an fr4 pcb, single-sided c opper, with 100cm2 copper pad area.
MGBR10L45 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-113.b utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expec ted to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
